Tweet
greetings just finished my transom,,, made out of 1.5 in cossa board blue water 26 daddoed out the area for the splash well betwween the rear of the boat tub leaving about 1.25inch thick going to use 3m 5200 sealent between top & bottom halfs of the boat befor installing the rub rail ,,,,,,drilled core samples on the stringers seams to be dry & hard no soft wood so ill leave it for now,,,,, see progress pictures
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. If you have trouble registering, Please use "Contact Us" on this form below. Some new registrations do not make it though security due to so many spam botts. We welcome new members !!
- If you are a supporting member, please log in. Supporting members don't see advertisements. Everybody else does If you are seeing this and you think you shouldn't be, your subcription has probably expired. Please renew your subscription and this notice will go away.